How to Write a Fabric Specification: A Contract Guide

A fabric specification is the document that tells everyone downstream, upholsterer, contractor, client, fire officer, exactly what fabric is being used and what it must achieve. A vague specification is where contract projects go wrong. This guide sets out what a complete fabric specification contains and what certificates to require. For where each decision falls in the project timeline, see our RIBA Plan of Work fabric guide.

What a Complete Specification Contains

A specification that prevents disputes states every performance requirement explicitly rather than assuming it. The core fields are the fabric name and range, the fibre composition, the abrasion requirement as a Martindale figure, the fire standard in full (for example BS 7176 Medium Hazard, not just Crib 5), the cleaning code required for the environment, the light fastness grade, and the colourway with a dye-lot reservation instruction for larger orders. For patterned fabric, add the pattern type and repeat. For each requirement, state the standard and the figure, not a general word like durable or fire-safe.

State the Standard in Full

The most common specification weakness is naming a standard loosely. Crib 5 alone is weaker than BS 5852 Ignition Source 5 (Crib 5). Fire-rated is meaningless without the standard. A Martindale requirement should give the figure, 100,000 rubs, not high abrasion. The fuller the reference, the less room for a substitution or a dispute later. State the standard, the part, and the figure for every performance field.

What Certificates to Require

For any contract project, require the independent test certificate before the fabric is installed, not a supplier’s claim of compliance. For fire, that means the certificate from a UKAS-accredited laboratory naming the fabric, the filling used in the test, the standard, and the result. A verbal assurance or a product description is not a certificate. For a composite standard such as BS 7176, confirm the certificate names the specific foam, because the certificate is valid only for the fabric and filling combination tested. For marine work, require the IMO certificate for the relevant part. For how FR certification works and who can issue it, see our how FR treatment works guide.

Confirm the Composite and the Cleaning Regime

Two checks prevent most late-stage failures. First, confirm the foam or filling matches the fire certificate, since substituting a different foam invalidates it. Second, confirm the fabric’s cleaning code suits the environment’s actual cleaning regime, an S-coded fabric fails in a setting that uses water-based cleaning. Present the environment’s cleaning products to the supplier and get written confirmation of compatibility. For the cleaning implications in demanding settings, see our healthcare fabric guide and hotel fabric specification guide.

Request Cuttings Before Committing

A cutting confirms colour, handle, and quality before the fabric is committed to a scheme, and provides the reference sample for matching later deliveries against. Request cuttings early, and for a phased order retain the first-delivery sample to check subsequent dye lots. For cuttings, dye lots, and lead-time planning, see our lead times and colour matching guide. For the full specification library organised by environment, application, and performance need, see our fabric buying guide by purpose.

Quick answers

What should a fabric specification include?
A complete fabric specification states the fabric name and range, the fibre composition, the Martindale abrasion figure, the fire standard in full (for example BS 7176 Medium Hazard), the cleaning code, the light fastness grade, and the colourway with a dye-lot reservation instruction for larger orders. For patterned fabric it adds the pattern type and repeat. Every performance requirement should give the standard and the figure, not a general word such as durable or fire-safe.

What certificates should I require before installing a contract fabric?
Require the independent test certificate before installation, not a supplier’s claim of compliance. For fire, that is the certificate from a UKAS-accredited laboratory naming the fabric, the filling used in the test, the standard, and the result. For a composite standard such as BS 7176, confirm the certificate names the specific foam, because it is valid only for the fabric and filling combination tested. For marine work, require the IMO certificate for the relevant part.

Why does the foam matter for a fire certificate?
Contract fire standards such as BS 5852 Crib 5 and BS 7176 test the fabric and filling together as a composite, not the fabric alone. A certificate is valid only for the specific fabric and foam combination tested. If the project uses a different foam from the one named in the certificate, the certificate does not cover the installation, and new testing is required. Always confirm the foam matches the certificate before ordering.

To request cuttings, visit KOTHEA.com/cuttings.