If you were given one pound for every time an interior designer asks which upholstery fabric is most durable, you would retire quickly. The answer is more complicated than a single test result can convey, and understanding why is useful when specifying fabric for a client.
What Abrasion Tests Actually Measure
Martindale and Wyzenbeek are abrasion tests. They measure one specific property: how many times a fabric can be rubbed against a standard surface before showing visible wear. They do not measure fibre strength, yarn construction, weave complexity, resistance to soiling, light fastness, or how well the fabric performs when cleaned. All of these variables also affect how long an upholstery fabric lasts in use.
There is a close relationship between fibre strength and yarn strength. Yarns are twisted to add strength, and a tighter twist generally produces a stronger yarn. This is measured in twists per inch or per metre. Tightly twisted yarns tend to be smooth and dense. Weave design adds another layer of complexity. The same fibre in different weave constructions can produce very different abrasion results. A fabric’s rub count is the outcome of fibre, yarn, and weave working together, which is why a single figure cannot tell the whole story.
The Two Tests
Martindale is the standard used in the UK and Europe. Wyzenbeek is the standard used in the United States. The two tests use different motions, different abradants, and different specimen orientations. There is no reliable correlation between them, and a result on one test cannot be used to predict a result on the other.
With Wyzenbeek, tested to ASTM D4157, a piece of cotton duck fabric or wire mesh is rubbed in a straight back-and-forth motion across the fabric until noticeable wear or thread break occurs. Each back-and-forth motion is one double rub.
With Martindale, tested to BS EN ISO 12947, the abradant is worsted wool or wire mesh and the fabric specimen is circular. The rubbing follows a Lissajous figure-of-eight pattern rather than a straight line. Each complete figure of eight is one cycle.
Specification Thresholds
The following figures represent standard guidance for specifying by application. For heavy duty contract use, the recommended minimum is 30,000 Wyzenbeek double rubs or 40,000 Martindale cycles. For general contract use the minimum is 15,000 Wyzenbeek double rubs or 20,000 Martindale cycles. For heavy domestic use the minimum is typically 15,000 Martindale cycles. For general domestic use, 15,000 to 25,000 Martindale cycles covers most applications. For light domestic or occasional use, 10,000 to 15,000 Martindale cycles is generally acceptable.
At results above 100,000, the practical difference in longevity becomes less meaningful for most residential applications. The cleaning and maintenance regime applied to a fabric will have more influence on its service life than the difference between a 100,000 and a 200,000 rub count.
On the Validity of Test Results
Some commentators question the reliability of abrasion test results. In the UK, test houses are independent and operate under British Standards monitoring. No individual fabric company is large enough to influence results, and it is in no supplier’s interest to undermine the authority of the independent bodies that regulate the industry. UK Martindale figures can generally be taken at face value when supplied with a third party test certificate from an accredited laboratory.
For the full technical methodology of the Martindale test, rub count classifications by application, and a detailed Martindale versus Wyzenbeek comparison, see: The Martindale Rub Test: A Complete Guide for Interior Designers and Specifiers.
For a direct side-by-side comparison of the two test methods, see: Martindale vs Wyzenbeek: Rub Test by Abrasion Explained.
Request Samples
Order cutting samples of any fabric from our current collections. Trade accounts only.
Order Cuttings